fordcortina.com.au

For Sale / Wanted => For Sale / For Trade / Wanting To Buy => Topic started by: cortina nut on January 03, 2012, 08:48:13 PM

Title: WTB cortina TE/TF air conditioning
Post by: cortina nut on January 03, 2012, 08:48:13 PM
hi i am after a factory a/c blower motor to suit a TE/TF cortina asap or one that will fit this unit out of another sort of car if any one knows of 1 that will fit..cheers
Title: WTB cortina TE/TF air conditioning
Post by: Bucster on January 15, 2012, 08:53:46 PM
Hi, me too, im just after the large box unit only, that fits in the engine bay for a/c in a Te.
I bought a TE that came with one, but when the car arrived the unit was missing, gosh i hate that.

Bucster
Title: WTB cortina TE/TF air conditioning
Post by: pcman on January 16, 2012, 12:20:02 PM
http://speedyairspares.com.au/
go aftermarket
Title: WTB cortina TE/TF air conditioning
Post by: TEcortina on January 16, 2012, 08:06:34 PM
hey ive got a ac bracket for a 302 winsor it came from a old school transit van don know what it came from to begin with but its the bracket to suit the old school ac pump that sits above the alt i think its up for grabs if needed
Title: WTB cortina TE/TF air conditioning
Post by: BigNorm on January 17, 2012, 12:27:10 AM
as far as a condensor is concerned u can buy them by dimensions.
Title: WTB cortina TE/TF air conditioning
Post by: Bucster on January 17, 2012, 08:26:16 PM
Hi all,
well i actually bit the bullet and ordered a speedy air spares unit, the Gen II, very compact unit with 2 dedicated screen demister outlets, left and right footwell outlets and 3 main 65mm outlets for the centre and side vents, the control unit gives full options for both heat and A/c

$880 for the base unit plus extras, condensor, filter/dryer etc.

Bucster
Title: WTB cortina TE/TF air conditioning
Post by: forgott3n on January 18, 2012, 09:41:10 AM
Bucster, I'd be interested to see photoes and maybe a DIY of your install when you do it. Im currently saving up to get my motor rebuilt but I need to replace my vent system as the trip dellortos wont fit in there with the standard blower unit.
Title: WTB cortina TE/TF air conditioning
Post by: Bucster on January 18, 2012, 10:26:24 AM
Hi, with your triple carbs are you trying to use the std heater box, cause i used a std heater box in the 1uzfe V8 cortina, i split the box apart, then drilled new holes for the heater pipes to exit at the top, turned the heater core upside down and put all back together, ground the plastic away anywhere close to hitting anything then fiberglassed up the clearence hole and original pipe exit holes and this gave me heaps of clearence around the v8 heads. That might work out easier for you.
Its the XR8 cortina thats getting A/C, mainly cause its going to NT, i will add pics and details when the unit arrives.

Bucster
Title: WTB cortina TE/TF air conditioning
Post by: forgott3n on January 18, 2012, 01:04:52 PM
might give that a try, but the runners on the manifold are about 150mm long so it might be more then just a little cut out of the box. I also have to pull my dash apart any as the fan switch is not working. luckily i have a working spare.
TinyPortal © 2005-2012