fordcortina.com.au
Tuning & Tech Center => Technical/Mechanical - sponsored by myrackbiz.com => Topic started by: Justin on January 04, 2013, 08:05:10 AM
-
Hi all here is where I'm up to
At first I had the converter bolted to the fly wheel as it did come bolted when I removed it and the auto is still on the car I had trouble linking the engine and tranny up
Next I found out that the converter had to be put in auto first
So I have done that now I want to install engine today and was asking what is the next step eg how do I bolt the flywheel to the converter when the converter is about 30 mm in the tranny ( not much room )
To get hands in and then all the next steps do I don't stuff anything
Hope some one can help cheers