fordcortina.com.au

Tuning & Tech Center => Technical/Mechanical - sponsored by myrackbiz.com => Topic started by: foe on June 06, 2018, 10:53:49 AM

Title: TF DIFF
Post by: foe on June 06, 2018, 10:53:49 AM

Gday fella,s i was told that a TC or TD 6 cylinder diff will fit into a TF, is this so,or is there mods to be done, i need another diff i found out mine is a 23 spline piece of shit.

Title: Re: TF DIFF
Post by: winton on June 06, 2018, 06:20:06 PM

The shock mounts are different on tc td.

Title: Re: TF DIFF
Post by: foe on June 07, 2018, 05:33:32 AM

Thanks Winton, what would i have to do to make the diff fit, or is it too much hassle.

Title: Re: TF DIFF
Post by: winton on June 07, 2018, 09:45:55 AM

You should be able to cut the mounts off yours and weld to the other. TC TD have a pin where te TF have a hole

Title: Re: TF DIFF
Post by: winton on June 07, 2018, 05:56:15 PM

I have a couple of te diffs but i am in SA.

Title: Re: TF DIFF
Post by: BigNorm on June 11, 2018, 11:03:29 AM

shock mounts are different but an absolute piece of piss to changeover or even make new ones. its just a piece of angle iron with a couple of holes drilled in it. you could get away without welding if you absolutely had to.