fordcortina.com.au
Tuning & Tech Center => Technical/Mechanical - sponsored by myrackbiz.com => Topic started by: svo302 on February 28, 2008, 08:51:13 PM
-
i have a 302 windsor tc cortina and wanted to go 5 stud, iv discovered aguy who does them on te with xw-xy hubs and some small plates for the calipers i was wondering if te and tc shared the same hub/stub axels so i could fit the kit on, thank you for your help
-
te and tc use completely different stub axles and nothing is interchangable. there are two ways u can go 5 stud with readily available stuff. one is the castlemaine rodshop kit which is what u'r mate is probably talking about with the xw two-piece hubs. the other is the hoppers stoppers kit is which is imo simpler, more efficient and better value.