fordcortina.com.au
Tuning & Tech Center => Technical/Mechanical - sponsored by myrackbiz.com => Topic started by: gazzac on December 01, 2008, 05:34:41 PM
-
Hello all, I am fitting a 2 litre pinto into a mk2 cortina can someone tell me if I can use the original 4 speed with hydrolic clutch or do I have to replace the box aswell.It has the original box with hydrolic clutch and an escort 711 1600 motor and that seams to match the box well,will the 2 litre do the same? please help, Gary Crompton :D
-
The bolt up pattern is the same but I'm sure the splines on the gearbox input is smaller than the 2 litre. I have put a 2 litre engine into an 1600 escort mexico which uses the hydraulic clutch and gearbox the same as the MK2 cortina and all I had to do was change the clutch centre plate to match the 2 litre clutch pressure plate and 1600 gearbox shaft. Not sure if the starter will suit the 2 litre flywheel though might have to use the 2 litre starter motor.