fordcortina.com.au

Tuning & Tech Center => Technical/Mechanical - sponsored by myrackbiz.com => Topic started by: F_P_V on December 24, 2008, 10:38:22 PM

Title: 4.1 ltr 250 X-FLOW into TC
Post by: F_P_V on December 24, 2008, 10:38:22 PM

i have pulled the 2 ltre out and have a TE 4.1 250 X-FLOW to put in    
the engine mounts wont go any were near fitting
does any one know if i get tc 6 cylnder engine mount will they fit the 250 X-FLOW or does any one have any sugestion on what to do  thanks.

Title: 4.1 ltr 250 X-FLOW into TC
Post by: pcman on December 26, 2008, 09:28:09 PM

you need the mounts from the 6cyl engine and 6cyl body

your also gonna need to chop the gearbox mount off  and weld on the 6cyl mounts

or make a custom mount  for the gearbox