fordcortina.com.au
Tuning & Tech Center => Technical/Mechanical - sponsored by myrackbiz.com => Topic started by: GASSED250 on March 31, 2010, 02:50:19 PM
-
Anyone know whats needed to do this, regarding mounts sump mods etc
I will be running a C4 with a modded BW bell
-
yeah heaps, the sump forms part of the bottom end and unless you can weld alloy it wont be an easy thing. i wrote a thing on how to engine mount in the DIY section here. as far as wiring the thing is concerned u wont be able to use the original ecu to control the vct unless u have the smartshield or smart lock removed so its either that or aftermarket injection but u'll need a higher end unit to drive the vct.
-
yeah wont be a easy one sump being your biggest prob i just put a el xr6
eng and t5 into my te used standard 250xflow sump slightly modified and xflow pickup and au v8 eng mounts with custom eng mounts that bolt to frame as for smartlock/smartsheild you can get a black box to get around that place in castlemain ( castlemain auto electricts i think)
hope that helped