fordcortina.com.au

Tuning & Tech Center => Forced Induction => Topic started by: tuf250 on November 07, 2010, 05:50:16 PM

Title: turbo motor
Post by: tuf250 on November 07, 2010, 05:50:16 PM

hi  guys

 i am a new member
i found a post from this forum a post about a 630kw engine

http://www.fordcortina.com.au/gallery/albums/userpics/10151/250CrossflowTurboSep2008.pdf

Distributor + O
Modified dizzy to with inbuilt crank trigger to suit Autronic ECU’s
Engine management
Autronic ecu including all sensors and wiring loom
Fuel maps for various stages of tune and fuel types (98, MS109, C16)
Buyer will need to supply MSD6 or similar ignition and coil


this set up is like mine but im having some problems with a mis fire at high rpm and the timing is retartind as well i wont to speak to the guy who posted that and see what dizzy to run and set up


thanks

Title: turbo motor
Post by: pcman on November 12, 2010, 10:38:59 PM

that would be markze

http://fordcortina.com.au/phpBB2/viewtopic.php?p=1832&highlight=#1832

check the link has his phone number tho its a few years old now